Kleenoil Benefits

 

 

eliminates_water2
 		 Eliminates Water
Water will always be present because of the heating and cooling of components in an engine. Diesel fuel used as the source of combustion contains sulfur. Small amounts of fuel will pass by the piston rings and end up in the oil. The sulfur will mix with the water resulting in sulfuric acids. Using the Kleenoil Bypass Filter System will remove all water down to less than 0.05%, reducing the formation of sulfuric acid that will cause accelerated wear to engine components.
eliminates_water   Removes Dirt and Contaminants
Dirt and wear metals will always be present in Hydraulic and Engine oil. The reasons that most fluid changes are done is to get rid of the dirt and contaminants. Conventional fluid filtration components will filter the fluid down to approximately 10-micron in size. Accelerated wear and damage occurs somewhere around 3-6 micron. Using the Kleenoil Bypass Filter System you will filter the fluid down to 1-micron in size reducing the chance of wear and ultimately reducing the number of engine failures and rebuilds that would have needed to be performed during the life of the unit.
desirable_elements   Doesn't Remove Desirable Elements
Certain components are purposely placed in lubrication oil to make it effective. Some of the additives include dispersants, detergents, oxidation and rust inhibitors, pour-point depressants, metal de-activators, and anti-foaming and gelling agents. While the Kleenoil Bypass Filter System is removing dirt, contaminants, wear metal particles and water; it is not removing the oil additives needed for continued use.
extends_oil_drains   Extends Drain Intervals
Because of the reasons mentioned above, oil can be run longer as it is kept clean, free of water and still maintain its additive package. Proper oil analysis will indicate the life of the oil but on average the drain is extended up to 10 times what it would be without the Kleenoil Bypass Filter System.
time_needed_for_service   Reduces Time Needed for Service
Changing the Kleenoil Filter Cartridge requires much less time than what is required to perform a conventional full fluid change. Simply remove the lid from the container, remove the old cartridge and install the new cartridge and seal. All this can be performed in less than 10 minutes and without the worry of spilling oil and disposing of contaminated fluids.
Continuous Procection  

Continuous Protection Provided
The Kleenoil Bypass Filter System is installed to filter the fluid whenever there is oil pressure. Once the engine or the hydraulic pump is activated and there is fluid pressure, the fluid is continuously passing through the densely wound filter cartridge. The cartridge is wound with pure coniferous long fiber wood pulp paper. This design allows the water to be extracted from the fluid and still allows the larger oil molecules to pass through unchanged. The dirt and wear particles are trapped in the filter giving you a continuous self-contained recycling system.
eliminates_water

 

Good for the Environment
Because the fluid is being recycled inside of its own application, longer drain intervals can be realized. Oil is a finite resource that one-day will run out. Keeping the fluid running longer reduces the amount of oil you will have to purchase throughout the now extended life of the unit.

Disposing of the used contaminated oil also creates a risk to the environment. Proper disposal methods are needed to safeguard the environment for our children. Reducing the amount of fluid that has to be disposed of is one way of reducing the impact on the already taxed environment.

Whenever a full fluid change is required to be done there is always a risk of spills and ground contamination. Reducing the number of full drains reduce this risk dramatically.

Edan Farms Testimonial

Edan Farms has been using PowerUp for over 20 years in all our Semi-tractors. We have been a contractor for Fedex Ground running from 20-30 rigs nearly every day. Each truck travels over 200,000 per year.

One of the first things we noticed when we started using PowerUp is that our engines run cooler. Since using PowerUp, we have not had to overhaul an engine in less than 1 million miles and most we haven't overhauled in less than 1.4 million miles. When we do take the engine apart, it is always very clean, and wear is extremely minimal. In 20 years, we have not had a single differential gear failure due to lubrication.

With PowerUp, we extended our oil drains to 30,000 miles and could have probably run further if we had chosen to.

About 10 years ago, because of your presentation on KleenOil Filtration, we started adding these filter units to our engine. With the continuous purification of the oil and complete removal of water, we now have been able to extend oil drains to well over 300,000 miles per rig. We still sample each engine every 30,000 miles and have been very impressed with the condition of the oil even after these extended oil drains. We have never had an issue due to lubrication with any of the engines.

PowerUp and Kleenoil have saved us thousands upon thousands of dollars in oil changes, engine repairs and overhauls. Presumably, though we have never collected the data, we have saved thousands in fuel costs because the engines maintain their efficiency due to very low wear.

I personally maintain our engines and I am a believer in these products because I have seen the results. I would recommend them to anyone. Please feel free to have anyone call if they have any questions.

Eric Schafer
Edan Farms, Inc.
Maintenance Supervisor
330-770-7746

Garry Mercer Trucking Inc. Testimonial

Three years ago, I introduced the Kleenoil Filter system into the Garry Mercer Trucking Fleet. My main purpose in doing so was to extend our oil change intervals, and reduce our oil usage without compromising the engine life.

To do this we started out by conducting a few tests. In our first test, we changed the Kleenoil filter every 30,000 km but left the engine oil in, and the filter on. We found we were able to run the oil up to 140,000 km without any problems. We still now only change the Kleenoil filter cartridge every 30,000 km and leave the engine oil filter on for the life of the oil at 100,000 km. This number was set by myself from the 140,000 km due to my precautions toward the engine and the potential wear.

As we conducted our tests we monitored the samples through Wear Check Oil. Together with Garry Mercer Trucking, they still play a large role in the operation of the Kleenoil System program. With Wear Check we sample the oil every other service at 60,000 km.

With using this system we have found positive results from different areas. We had an engine apart at 1,500,000 km and once we dropped the rod and main bearings we found that the bearings were still good and able to stay in service. The Kleenoil System has been compatible with both Shell Rotella 15W40 and Castrol Hypuron S 15W40 oils, and both have shown better results with the program than previously without. We have also tried to run the extended oil drain without using the Kleenoil System but found they were only able to extend to 60,000 km before samples showed signs of wear.

The Kleenoil System has given our technicians more time to concentrate on other areas of the units because of its success. The program has also saved us a great deal of money on engine oil without compromising the engine life. The system is easy to install and easy to maintain. It is my opinion that the Kleenoil System will not only save your company money and maintenance costs but help to protect the environment as well.

Brian Tower, Service Manager, Garry Mercer Trucking Inc.